IPG Hydraulic Setting Tool




It is designed for installation, disconnection and connection of the tubing string with the stand-alone packer and anchor equipment in the production string.

ESCRIPTION APPLICATION IN PACKER BHA

  • for oil and gas wells operation and water injection;
  • for remedial works, multi-packer BHAs installation and other well workover operations.

ADVANTAGES

  • high reliability of the setting tool’s sealing assembly enables to carry out all the required operations at maximum pressure differential across the packer;
  • pressure-tight connection of the fishing tool after its attachment allows to carry out well operations at a pressure up to 25 MPa or continue the well operation;
  • using this tool saves up considerable material costs in the course of remedial works, multi-packer BHA’s installation and other well workover operations;
  • no rotation of the tubing needed for disconnection.

DESIGN FEATURES

  • IPG set consists of a tool for setting a packer, disconnection from the latter for autonomous operation and IL fishing tool for a pressure-tight connection with IPG tool body and subsequent packer releasing;
  • IPG is hydraulically disconnected after the ball is dropped, and IL fishing tool is connected by mechanical unloading of the tubing weight not less than 5 kN.

ARTICLES ABOUT THE PRODUCT

  • Oil. Gas. Novation 12.2012 “Technologies and equipment to reduce expenses in squeeze cementing”.

SPECIFICATIONS

Type Design Documentation Code Casing string, mm Tool releasing pressure, MPa Maximum pressure differential, MPa Maximum compressive load, kN Maximum tensile load, kN Dimensions, mm Weight, kg Connection thread as per GOST 633-80
Nominal D Wall thickness Setting tool Fishing tool Setting tool Fishing tool Outside D Passage bore diameter, mm  Length  Setting tool Fishing tool Top (coupling) Bottom (nipple)
Setting tool Fishing tool
IPG-118-58-500-Т1001-К3 AHA 4.241.007 140 6.2-7.7 3.7-222 50 25 350 200 350 118 58 53 600 26 18 89 73
146 7.0-10.7
IPG-136-58-500-Т1001-К3 AHA 4.241.014 168 7.3-12.1 136 611 36 21 89
IPG-152-58-500-Т1001-К3 AHA 4.241.019 178 6.9-9.2 152 610 36 21

1 when placing an order for equipment for Т=150°С, please indicate Т150.

2 Adjusted by the number of shear pins.


The tool is available in the following configurations:

No. SPTA kit Tool for Т=100°С Tool for Т=150°С
Type Design Documentation code Type Design Documentation code
1 Zero IPG-118-58-500-Т100-К3-00 AHA 4.241.007/00 IPG-118-58-500-Т150-К3-00 AHA 4.241.007-20/00
2 Minimum SPTA 01 IPG-118-58-500-Т100-К3-01 AHA 4.241.007/01 IPG-118-58-500-Т150-К3-01 AHA 4.241.007-20/01
3 Standard SPTA 02 IPG-118-58-500-Т100-К3-02 AHA 4.241.007/02 IPG-118-58-500-Т150-К3-02 AHA 4.241.007-20/02
4 Standard Plus SPTA 03 IPG-118-58-500-Т100-К3-03 AHA 4.241.007/03 IPG-118-58-500-Т150-К3-03 AHA 4.241.007-20/03
5 Maximum SPTA 04 IPG-118-58-500-Т100-К3-04 AHA 4.241.007/04 IPG-118-58-500-Т150-К3-04 AHA 4.241.007-20/04


Sample order code for the setting tool in “Standard SPTA 02” configuration:

  • for Т=100°С — IPG-118-58-500-Т100-К3-02 AHA 4.241.007/02;
  • for Т=150°С — IPG-118-58-500-Т150-К3-02 AHA 4.241.007-20/02.

Regarding equipment purchase, contact

Dinar Sufiyanov
Dinar Sufiyanov
Post:  Head of sales and service development in foreign markets
Phone:  +7 (34767) 5-21-01
Cell:  +7-937-318-87-56
E-mail:  razvitie@npf-paker.ru
Skype:  ved-paker