IPM Mechanical Setting Tool




It is designed for the tubing string connection and disconnection with the stand-alone packer and anchor equipment in the production string.

DESCRIPTION APLICATION

  • for oil and gas wells operation;
  • for remedial works and other well workover operations.

ADVANTAGES

  • high reliability of the setting tool sealing assembly enables to carry out annulus pressure testing of a packer and subsequent disconnection from it after running the tool together with the packer into the well and subsequent setting of the packer;
  • this tool can be used multiply;
  • using this tool allows to reduce material costs significantly during remedial works and other well workover operations.

DESIGN FEATURES

  • the complete set of IPM consists of a tool for setting a stand-alone packer and subsequent disconnection from the tubing, a tool for connection between the tubing and a stand-alone packer and anchor equipment and its further release and retrieval from the well;
  • after a packer is set into the well the tool and the tubing are disconnected from it by a 5 to 8 turn right-hand rotation of the tubing with simultaneous unloading of the tool from the weight of the run-in tubing;
  • tool attachment: the top part (run-in) and the bottom part (left in the well) are attached by application of an axial force (without rotation) within the range of 60 to 90 kN generated by the weight of the tubing.

SPECIFICATIONS

Type

Design Documentation Code

Casing string inner diameter for which the tool is applicable, mm

Maximum inner and outer pressure sensed by the tool, MPa

Maximum axial load transferred to the packer through the tool, kN (not more than)

Outside diameter, mm (not more than)

Passage bore minimum diameter, mm

Length, mm (not more than)

Weight, kg (not more than)

Connection thread as per GOST 633-80

Min

Max

Top (coupling)

Bottom (nipple)

IPM-114-50-350-T1001-K3

AHA 4.241.001

121.3

126

35

200

114

50

685

35

73

IPM-118-50-350-T1001-K3

AHA 4.241.001-01

124.7

132

118

42

IPM-140-62-350-T1001-K3

AHA 2.839.258

146

152

140

62

675

50

89

1 when placing an order for equipment for Т=150°С, please indicate Т150.


The tool is available in the following configurations:

No. SPTA kit Tool for Т=100°С Tool for Т=150°С
Type Design Documentation code Type Design Documentation code
1

Zero

IPM-114-50-350-Т100-К3-00 AHA 4.241.001/00 IPM-114-50-350-Т150-К3-00 AHA 4.241.001-20/00
2

Minimum SPTA 01

IPM-114-50-350-Т100-К3-01 AHA 4.241.001/01 IPM-114-50-350-Т150-К3-01 AHA 4.241.001-20/01
3

Standard SPTA 02

IPM-114-50-350-Т100-К3-02 AHA 4.241.001/02 IPM-114-50-350-Т150-К3-02 AHA 4.241.001-20/02
4

Standard Plus SPTA 03

IPM-114-50-350-Т100-К3-03 AHA 4.241.001/03 IPM-114-50-350-Т150-К3-03 AHA 4.241.001-20/03
5

Maximum SPTA 04

IPM-114-50-350-Т100-К3-04 AHA 4.241.001/04 IPM-114-50-350-Т150-К3-04 AHA 4.241.001-20/04


Sample order code for the setting tool in “Standard SPTA 02” configuration:

  • for Т=100°С — IPM-114-50-350-Т100-К3-02 AHA 4.241.001/02;
  • for Т=150°С — IPM5-114-50-350-Т150-К3-02 AHA 4.241.001-20/02.

Regarding equipment purchase, contact

Dinar Sufiyanov
Dinar Sufiyanov
Post:  Head of sales and service development in foreign markets
Phone:  +7 (34767) 5-21-01
Cell:  +7-937-318-87-56
E-mail:  razvitie@npf-paker.ru
Skype:  ved-paker