PRZ Drillable Cementing (Bridge) Plug (rated operating pressure up to 5076 psi)
PRZ Drillable Cementing (Bridge) Plug (rated operating pressure up to 5076 psi)
PRZ Drillable Cementing (Bridge) Plug (rated operating pressure up to 5076 psi)
It is designed for pressure-tight separation of the casing string intervals.
Your message sent
DESCRIPTION ADVANTAGES:
- it is used as a cementing or a bridge plug;
- easy to install by generating excess pressure within the tubing;
- pressure tightness at the top and at the bottom after installation and retrieval of the setting tool;
- protection against premature setting of the slips;
- small length of the drillable area;
- good drillability of the applied materials;
- average time to drill out PRZ with a three-cone bit is 6.30 hrs.
FEATURES:
- the plug has two valves to prevent cement from overflowing from above and below the PRZ installation area;
- individual design of the slips teeth ensures secure fastening with the casing string and prevents PRZ from rotating while drilling out;
- allows pressure cementing above PRZ.
SPECIFICATIONS
| Type | Code | Casing string, mm | Outside diameter, mm | Passage bore diameter, mm (not less than) | Length, mm (not more than) | Weight, kg | Setting Tool | |
| Nominal Diameter | Wall thickness | |||||||
| PRZ-82-38-350-Т1001-К12 | AHA 5.884.122 | 102 | 5.5 to 6.5 | 82 | 38 | 463 | 3.5 | IUG-82-21-350-Т1001-К32 |
| PRZ-88-38-350-Т1001-К13 | AHA 5.884.122-01 | 114 | 8.6 to 10.2 | 88 | 4.4 | |||
| PRZ-92-38-350-Т1001-К13 | AHA 5.884.122-02 | 5.2 to 7.4 | 92 | 4.4 | ||||
| PRZ-100-38-350-Т1001-К13 | AHA 5.884.125 | 127 | 6.4 to 10.7 | 100 | 5.3 | IUG -82-21-350-Т1001-К32 | ||
| PRZ-114-60-350-Т1001-К1 | AHA 5.884.022 | 140 | 6.2 to 9.2 | 114 | 60 | 500 | 6.7 | IUG -114-44-350-Т1001-К3 |
| 146 | 9.5 to 10.7 | |||||||
| PRZ-120-60-350-Т1001-К1 | AHA 5.884.022-01 | 140 | 6.2 to 7.0 | 120 | 8 | |||
| 146 | 6.5 to 9.5 | |||||||
| PRZ-140-60-350-Т1001-К1 | AHA 5.884.121 | 168 | 7.3 to 10.6 | 140 | 60 | 500 | 10 | IUG -140-48-350-Т1001-К3 |
| 178 | 12.7 to 15.0 | |||||||
| PRZ-148-60-350-Т1001-К1 | AHA 5.884.121-01 | 178 | 5.9 to 11.5 | 148 | 11 | |||
1 when placing an order for equipment for Т=150°С, please indicate Т150.
2 at the well pilot testing stage.
3 at the bench testing stage.
Maximum differential pressure on the plug is 5076 psi.
Sample order code for PRZ Cementing drillable plug in case of pumping cement above and below PRZ or in case of using PRZ as a bridge plug:
- PRZ-120-60-350-Т100-К1 AHA 5.884.022-01
Sample order code in case of pumping cement only below PRZ (version without upper valve):
- PRZ1-120-60-350-Т100-К1
Sales
Dinar Sufiyanov
Director of sales development
Timur Minnivaleev, Ph.D
Deputy director for external relations
+7 927 468-33-87